eChook GPT Documentation
  • Welcome to the eChook nano documentation
  • System Overview
  • The eChook Nano Kit
    • Versions
  • Build Instructions (Kit V1.x)
    • Build Steps Photos
    • First Power On
  • Build Instructions (Kit V2+)
  • Programming the Arduino
    • Install Arduino IDE
    • Arduino Drivers
    • Download the eChook Arduino Code
    • Programming the Arduino
  • Setting up the Bluetooth
    • Pairing with a phone
  • Connecting the eChook to the Car
    • Power and Voltage
    • Current Sensor
    • Throttle Input
    • External Buttons and Brake
    • Temperature Sensors
    • Wheel and Motor RPM
    • PWM Output
  • Calibrating the eChook
    • Wheel Speed and Motor RPM
    • Temperature
    • Voltage
    • Current
  • Using the App
    • Pair eChook to Phone
    • Setting up the App
    • Logging Data
    • Lap Counting
  • Telemetry (Live Data)
    • eChook Live Data
    • Node-Red Integration
    • DIY Web Dashboard
  • Using the Data
  • Circuit Schematics
    • 12 and 24v Inputs
    • Temperature Inputs
    • Bluetooth Module
    • Throttle Input
    • Current Input
    • Button Inputs
    • RPM Inputs
    • PWM Output
    • Power Regulator
    • Expansion Port
  • All about the Arduino nano
    • The eChook nano Code
  • Bluetooth Communication
    • Bluetooth Packet Encoding
    • Bluetooth Packet Decoding
  • Experimental Section
    • GUI Calibration
  • eChook Accessories
  • DIY eChook
  • Spare Parts
  • Troubleshooting
  • Contributing
Powered by GitBook
On this page

Was this helpful?

Experimental Section

A section for new developments where beta testers are needed :)

PreviousBluetooth Packet DecodingNextGUI Calibration

Last updated 1 year ago

Was this helpful?