eChook GPT Documentation
CtrlK
  • Welcome to the eChook nano documentation
  • System Overview
  • The eChook Nano Kit
    • Versions
  • Build Instructions (Kit V1.x)
    • Build Steps Photos
    • First Power On
  • Build Instructions (Kit V2+)
  • Programming the Arduino
    • Install Arduino IDE
    • Arduino Drivers
    • Download the eChook Arduino Code
    • Programming the Arduino
  • Setting up the Bluetooth
    • Pairing with a phone
  • Connecting the eChook to the Car
    • Power and Voltage
    • Current Sensor
    • Throttle Input
    • External Buttons and Brake
    • Temperature Sensors
    • Wheel and Motor RPM
    • PWM Output
  • Calibrating the eChook
    • Wheel Speed and Motor RPM
    • Temperature
    • Voltage
    • Current
  • Using the App
    • Pair eChook to Phone
    • Setting up the App
    • Logging Data
    • Lap Counting
  • Telemetry (Live Data)
    • eChook Live Data
    • Node-Red Integration
    • DIY Web Dashboard
  • Using the Data
  • Circuit Schematics
    • 12 and 24v Inputs
    • Temperature Inputs
    • Bluetooth Module
    • Throttle Input
    • Current Input
    • Button Inputs
    • RPM Inputs
    • PWM Output
    • Power Regulator
    • Expansion Port
  • All about the Arduino nano
    • The eChook nano Code
  • Bluetooth Communication
    • Bluetooth Packet Encoding
    • Bluetooth Packet Decoding
  • Experimental Section
    • GUI Calibration
  • eChook Accessories
  • DIY eChook
  • Spare Parts
  • Troubleshooting
    • Power
    • Arduino
    • Bluetooth
    • Current Sensor
    • Incorrect Data
  • Contributing
Powered by GitBook
On this page

Was this helpful?

  1. Circuit Schematics

Bluetooth Module

This is connected directly to TX and RX on the Arduino and 5V and ground. Nothing interesting to see here!

PreviousTemperature InputsNextThrottle Input

Last updated 7 years ago

Was this helpful?